News/05.08.2018: Release Firmware 20180802
Aus Freifunk Franken
Datum: 05.08.2018
Autor: RedDog ChristianD
Veröffentlicht: Release Firmware 20180802,
[1]
Release der Firmware 20180802
Hi
Nun ist es endlich soweit. Die Firmware in der Version 20180802 ist released. Dies ist die erste Firmware, welche das sogenannte "V2" implementiert.
Macht euch vor den Update bitte einen Überblick, was "V2" für eure Installationen bedeutet. Dies kann man anhand der sehr gut gelungenen Dokumentation im Wiki machen: https://wiki.freifunk-franken.de/w/KeyXchangeV2
Beachtet bitte insbesondere den Abschnitt zum Upgrade von Freifunk Knoten: https://wiki.freifunk-franken.de/w/KeyXchangeV2#Gefahren_eines_Updates_vom_alten_System
Größte Änderungen auf einen Blick seit 20170918:
- Code-Cleanups
- Data processing notes
- Update Tunneldigger (L2TPv3)
- Batman Upgrade
- Mesh über 802.11s
- KeyXchangeV2
- Hood übergreifende IPv6 ULA Adressen
- Verbindungen zu dezentralen Hoods möglich
- Eigene ESSID pro Hood
- Macnocker ist Teil der Firmware
- Config-AP eingeführt
- 1043v5 Support
- Unifi AC Mesh Support
Die Firmware befindet sich am üblichen Ort: https://dev.freifunk-franken.de/firmware/20180802/
Sollten euch Probleme bei der Benutzung der Firmware auffallen, scheut euch nicht diese Probleme in den Bug-Tracker einzutragen. Dazu einfach einen Account anlegen und einen neuen Eintrag erfassen: https://mantis.freifunk-franken.de
Ich bedanke mich für die vielen Beiträge und die super Diskussionen.
Unten, wie immer, das Shortlog.
Tim
-- Adrian Schmutzler (70):
fff-nodewatcher: Use mac address instead of standard node name
buildscript: Update LEDE and packages, use lede git mirror
Archer C25: Update qca9887 firmware to 10.2.4-1.0-00029
vpn-select: Use keyxchangev2data instead of fastd_fff_output
Remove references to community.cfg
fff-web: Show hood in public and internal web interface
Configure the Node a routable IPv6 ULA
fff-hoods: Fix fe80::1 for multiple configap interfaces
fff-hoods: Fix case of missing keyxchangev2data
Utilize PKG_NAME in Makefiles
Revert "Archer C25: Disable 5 GHz to provide working firmware"
buildscript: Fix typo
fff-hoods: Use channel provided by gateway
fff-hoods: Introduce sector files for custom settings
fff-hoods: Use variables for hood file names
fff-hoods: Use w5sta for download
fff-hoods: Fix missing commit for hood name
fff-network/fff-hoods: Create functions for IPv6 rewriting
CPE210: Fix ROUTERMAC
fff-web: Extend switch port assignment display in ports.html
fff-boardname: Reorganize WR841 boardnames
Add TL-WR1043N v5
fff-network: Fix mac adresses not set during merge/rebase
fff-hoods/fff-wireless: Don't delete WiFi devices
fff-hoods: Suppress warning for missing sectorfile
Support subtarget in buildscript
fff-web: Fix style and XHTML conformity in upgrade.html
show_info: Add assignment without switch
fff-web: Show WiFi channels and SSID
show_info: Display hood information
Rearrange fff config values into their own config file
fff-support: Update PoE passthrough code
fff-web: Added options to disable update notification
fff-web: Include new options into settings.html
fff-web/show_info: Put common code into function
fff-network: Fix second occurrence of ROUTERMAC and ETHMESHMAC
fff-web: Allow minus (-) in passwords
fff-network: Commit only network
configurehood: Wait for the config AP to build when in sta mode
configurehood: Prevent connecting two hoods
nodewatcher: Provide additional information about WiFi interfaces
LEDE: Go back to OpenWRT sources
configurenetwork: Put One- and Two-Port pre-setup into function
fff-network/fff-hoods: Only use MAC address in network lib
fff-network: Calculate IPv6 using ROUTERMAC variable
nodewatcher: Fix bugs in gateway list creation
fff-hoods: Replace hiddenapflag by check for real conditions
fff-sysupgrade/fff-hoods: Make sectorfile upgradesafe
GL-AR150: Fix ETHMESHMAC
fff-hoods: Restart alfred after keyxchange file update
fff-nodewatcher: Add detailed clients data
nodewatcher: Provide data to calculate airtime
fff-web: Fix two bugs in wifiscan.html
configurehood: Improve conditions for configap setup
packages/fff: Split fff-hoods into two packages
fff-web: UPGRADE_PATH in header should be taken from hood file
configurehood: Fix "wifi" blocking correct network status
detection
alfred: Support interfaces IDs with more than two digits
Unifi AC: remove bs-partition ro-flag
configurenetwork: Improve output when setting IPv6 addresses
fff-batman-adv: Remove vis_mode from uci config
Data processing notes: Add in fff-web
Data processing notes: Add for SSH access
hood files: Use more meaningful and concise naming scheme
hood file: Use different files for www and for checksum
comparison
configurehood: Only provide hood file from GW/KeyXchange via WWW
hood files: Move files from /www to /tmp and link there
configurehood: Don't remove timestamp for checksum comparison
nodewatcher: Change mechanism for client device detection
vpn-select: Demand hood file to be provided as argument
Christian Dresel (7):
Update Batman to compat15
Reconfigure fff-wireless for keyxchangev2
Reconfigure vpn-select for keyxchangev2
Add fff-hoods
Add support for Unifi AC Mesh
fff-hoods: Make possible to use fixed hoodfile
Disable VPN if not in use
Fabian Blaese (12):
Support batman-adv meshing over 802.11s
consistently use same webserver port for hoodfile on wifi and lan
fff-network: evaluate macaddress in device config
Use SWITCHDEV variable for mac address fixing
configurehood: Allow for spaces after identifier
fff-network: Get MAC from wifi device instead of wifi network
CPE510: Add ROUTERMAC
Revert openwrt patch which caused too high tx powers
Move hoodfile acquisition into function
Allow initial configuration from Ethernet
Remove sectorfile for first release
Add batman-adv patch to remove gw mode switch message
Robert Langhammer (7):
fff-hoods: fix sed to substitute timestamp
fastd: generate the key from urandom
Update tunneldigger
fff-network: correct path to iptables
Update tunneldigger
Remove double equals.
Remove double square bracket. [[ is a bash or ksh built-in, and
cannot be used in a #!/bin/sh script.
Tim Niemeyer (14):
fff-hoods: only delete hiddenapfile if ap was configured
fff-hoods: move hiddenapfile variable
fff-alfred: new package
fff-alfred: do not use bat0 for master selection
WR841-v7: get routermac from phy0 instead of wlan0
bsp/default: move network sysctl's to fff-network
fff-network: move sysctl settings to a function
fff-firewall: clean up v6 rules on prepare
fff-network: rework sysctl's
fff-network: enable forwarding; filter forwarding
fff-macnock: new package
fff-hoods: set hood to none if on station mode
fff-hoods: call reload_config after uci commit
Revert "configurehood: Prevent connecting two hoods"
