Firmware-Update: Unterschied zwischen den Versionen

Aus Freifunk Franken
Wechseln zu:Navigation, Suche
Keine Bearbeitungszusammenfassung
(Weiterleitung nach Update erstellt)
Markierung: Neue Weiterleitung
 
(Eine dazwischenliegende Version von einem anderen Benutzer wird nicht angezeigt)
Zeile 1: Zeile 1:
Achtung dies ist ein Entwurf
#REDIRECT [[Update]]
 
sysupgrade von 0.5.x auf aktuelle Firmware
 
<pre>
 
BOARD=$(cat /var/sysinfo/board_name)
case "$BOARD" in
    tl-wr1043nd)
        BOARD=tl-wr1043nd-v1
        ;;
    tl-wr741nd)
        grep "Atheros AR7240 rev 2" /proc/cpuinfo && BOARD=tl-wr741nd-v2 || BOARD=tl-wr741nd-v4
        ;;
    tl-wr741nd-v4)
        grep 740 /var/sysinfo/model && BOARD=tl-wr740n-v4
        ;;
    tl-wr841n-v7)
        BOARD=tl-wr841nd-v7
        ;;
    tl-wr841n-v9)
        grep "v10" /var/sysinfo/model && BOARD=tl-wr841n-v10
        ;;
    nanostation-m)
        BOARD=ubnt-nano-m
        ;;
    tl-wa860re)
        BOARD=tl-wa860re-v1
        ;;
    tl-wdr3500)
        BOARD=tl-wdr3500-v1
        ;;
    tl-wdr4300)
        grep "3600" /var/sysinfo/model && BOARD=tl-wdr3600-v1
        grep "4300" /var/sysinfo/model && BOARD=tl-wdr4300-v1
        grep "4310" /var/sysinfo/model && BOARD=tl-wdr4310-v1
        ;;
esac
 
case $BOARD in
    tl-wdr4900-v1 )
        SOC="mpc85xx" ;;
    * )
        SOC="ar71xx" ;;
esac
 
FILE="fff-20170110-${SOC}-g-${BOARD}-squashfs-sysupgrade.bin"
 
echo -ne "\nHardware: $BOARD\n"
echo -ne "Downloading $FILE\n\n"
cd /tmp/
wget [fe80::ff:feee:1%br-mesh]:80/dev/firmware/current/${FILE}
wget [fe80::ff:feee:1%br-mesh]:80/dev/firmware/current/${FILE}.md5
echo -ne "\ndone. Comparing md5 sums: "
md5sum -c ${FILE}.md5
ret=$?
echo
if [ $ret -ne 0 ]; then
  echo -ne "md5 sums do not match. Try restarting this script to redownload the firmware.\n\n"
  rm -f ${FILE}*
  exit 1
else
  while true; do
    read -p "md5 sums correct. Should I start upgrading the firmware (y/N)? " yn
    case $yn in
        [Yy] ) echo -ne "\nStarting firmware upgrade. Don't touch me until I reboot.\n\n\n"; sysupgrade  ${FILE}; break;;
        [Nn]|* ) echo -ne "\nAborting firmware upgrade.\n\n"; rm -f ${FILE}*; exit 0;;
    esac
  done
fi
 
</pre>

Aktuelle Version vom 28. Juli 2019, 13:20 Uhr

Weiterleitung nach: