Quelltext der Seite News/05.12.2018: Release Firmware 20181202

'''Datum:''' 05.08.2018 <br>
'''Autor:''' [[Benutzer:RedDog|RedDog]] [[Benutzer:ChristianD|ChristianD]]<br>
'''Veröffentlicht:''' [https://wiki.freifunk-franken.de/w/News/05.08.2018: Release Firmware 20180802], 
[http://lists.freifunk.net/pipermail/franken-freifunk.net/2018-August/015071.html]

'''Release der Firmware 20180802'''

Hi

Nun ist es endlich soweit. Die Firmware in der Version 20180802 ist
released. Dies ist die erste Firmware, welche das sogenannte "V2"
implementiert.

Macht euch vor den Update bitte einen Überblick, was "V2" für eure
Installationen bedeutet. Dies kann man anhand der sehr gut gelungenen
Dokumentation im Wiki machen:
https://wiki.freifunk-franken.de/w/KeyXchangeV2

Beachtet bitte insbesondere [https://wiki.freifunk-franken.de/w/Anleitung:FirmwareUpdate die Anleitung] zum Update von Freifunk Knoten,  [https://wiki.freifunk-franken.de/w/KeyXchangeV2#Gefahren_eines_Updates_vom_alten_System was beim Update schief gehen kann] und werft einen Blick in die [https://wiki.freifunk-franken.de/w/KeyXchangeV2#FAQ FAQs]!


Größte Änderungen auf einen Blick seit 20170918:
* Code-Cleanups
* Data processing notes
* Update Tunneldigger (L2TPv3)
* Batman Upgrade
* Mesh über 802.11s
* KeyXchangeV2
** Hood übergreifende IPv6 ULA Adressen
** Verbindungen zu dezentralen Hoods möglich
** Eigene ESSID pro Hood
** Macnocker ist Teil der Firmware
** Config-AP eingeführt
* 1043v5 Support
* Unifi AC Mesh Support

Die Firmware befindet sich am üblichen Ort:
https://dev.freifunk-franken.de/firmware/20180802/

Sollten euch Probleme bei der Benutzung der Firmware auffallen, scheut
euch nicht diese Probleme in den Bug-Tracker einzutragen. Dazu
einfach einen Account anlegen und einen neuen Eintrag erfassen:
https://mantis.freifunk-franken.de

Ich bedanke mich für die vielen Beiträge und die super Diskussionen.

Unten, wie immer, das Shortlog.

Tim

--
Adrian Schmutzler (70):
      fff-nodewatcher: Use mac address instead of standard node name
      buildscript: Update LEDE and packages, use lede git mirror
      Archer C25: Update qca9887 firmware to 10.2.4-1.0-00029
      vpn-select: Use keyxchangev2data instead of fastd_fff_output
      Remove references to community.cfg
      fff-web: Show hood in public and internal web interface
      Configure the Node a routable IPv6 ULA
      fff-hoods: Fix fe80::1 for multiple configap interfaces
      fff-hoods: Fix case of missing keyxchangev2data
      Utilize PKG_NAME in Makefiles
      Revert "Archer C25: Disable 5 GHz to provide working firmware"
      buildscript: Fix typo
      fff-hoods: Use channel provided by gateway
      fff-hoods: Introduce sector files for custom settings
      fff-hoods: Use variables for hood file names
      fff-hoods: Use w5sta for download
      fff-hoods: Fix missing commit for hood name
      fff-network/fff-hoods: Create functions for IPv6 rewriting
      CPE210: Fix ROUTERMAC
      fff-web: Extend switch port assignment display in ports.html
      fff-boardname: Reorganize WR841 boardnames
      Add TL-WR1043N v5
      fff-network: Fix mac adresses not set during merge/rebase
      fff-hoods/fff-wireless: Don't delete WiFi devices
      fff-hoods: Suppress warning for missing sectorfile
      Support subtarget in buildscript
      fff-web: Fix style and XHTML conformity in upgrade.html
      show_info: Add assignment without switch
      fff-web: Show WiFi channels and SSID
      show_info: Display hood information
      Rearrange fff config values into their own config file
      fff-support: Update PoE passthrough code
      fff-web: Added options to disable update notification
      fff-web: Include new options into settings.html
      fff-web/show_info: Put common code into function
      fff-network: Fix second occurrence of ROUTERMAC and ETHMESHMAC
      fff-web: Allow minus (-) in passwords
      fff-network: Commit only network
      configurehood: Wait for the config AP to build when in sta mode
      configurehood: Prevent connecting two hoods
      nodewatcher: Provide additional information about WiFi interfaces
      LEDE: Go back to OpenWRT sources
      configurenetwork: Put One- and Two-Port pre-setup into function
      fff-network/fff-hoods: Only use MAC address in network lib
      fff-network: Calculate IPv6 using ROUTERMAC variable
      nodewatcher: Fix bugs in gateway list creation
      fff-hoods: Replace hiddenapflag by check for real conditions
      fff-sysupgrade/fff-hoods: Make sectorfile upgradesafe
      GL-AR150: Fix ETHMESHMAC
      fff-hoods: Restart alfred after keyxchange file update
      fff-nodewatcher: Add detailed clients data
      nodewatcher: Provide data to calculate airtime
      fff-web: Fix two bugs in wifiscan.html
      configurehood: Improve conditions for configap setup
      packages/fff: Split fff-hoods into two packages
      fff-web: UPGRADE_PATH in header should be taken from hood file
      configurehood: Fix "wifi" blocking correct network status
detection
      alfred: Support interfaces IDs with more than two digits
      Unifi AC: remove bs-partition ro-flag
      configurenetwork: Improve output when setting IPv6 addresses
      fff-batman-adv: Remove vis_mode from uci config
      Data processing notes: Add in fff-web
      Data processing notes: Add for SSH access
      hood files: Use more meaningful and concise naming scheme
      hood file: Use different files for www and for checksum
comparison
      configurehood: Only provide hood file from GW/KeyXchange via WWW
      hood files: Move files from /www to /tmp and link there
      configurehood: Don't remove timestamp for checksum comparison
      nodewatcher: Change mechanism for client device detection
      vpn-select: Demand hood file to be provided as argument

Christian Dresel (7):
      Update Batman to compat15
      Reconfigure fff-wireless for keyxchangev2
      Reconfigure vpn-select for keyxchangev2
      Add fff-hoods
      Add support for Unifi AC Mesh
      fff-hoods: Make possible to use fixed hoodfile
      Disable VPN if not in use

Fabian Blaese (12):
      Support batman-adv meshing over 802.11s
      consistently use same webserver port for hoodfile on wifi and lan
      fff-network: evaluate macaddress in device config
      Use SWITCHDEV variable for mac address fixing
      configurehood: Allow for spaces after identifier
      fff-network: Get MAC from wifi device instead of wifi network
      CPE510: Add ROUTERMAC
      Revert openwrt patch which caused too high tx powers
      Move hoodfile acquisition into function
      Allow initial configuration from Ethernet
      Remove sectorfile for first release
      Add batman-adv patch to remove gw mode switch message

Robert Langhammer (7):
      fff-hoods: fix sed to substitute timestamp
      fastd: generate the key from urandom
      Update tunneldigger
      fff-network: correct path to iptables
      Update tunneldigger
      Remove double equals.
      Remove double square bracket. [[ is a bash or ksh built-in, and
cannot be used in a #!/bin/sh script.

Tim Niemeyer (14):
      fff-hoods: only delete hiddenapfile if ap was configured
      fff-hoods: move hiddenapfile variable
      fff-alfred: new package
      fff-alfred: do not use bat0 for master selection
      WR841-v7: get routermac from phy0 instead of wlan0
      bsp/default: move network sysctl's to fff-network
      fff-network: move sysctl settings to a function
      fff-firewall: clean up v6 rules on prepare
      fff-network: rework sysctl's
      fff-network: enable forwarding; filter forwarding
      fff-macnock: new package
      fff-hoods: set hood to none if on station mode
      fff-hoods: call reload_config after uci commit
      Revert "configurehood: Prevent connecting two hoods"

[[Kategorie:News_Draft]]